Marty McGuire

Archive for November 2009

Mon Nov 30
๐Ÿ“ Checked in at Mad Mex, Pittsburgh, PA.
๐Ÿ“ Checked in at HackPittsburgh, Pittsburgh, PA.
๐Ÿ“ Checked in at Spice Island Tea House, Pittsburgh, PA.
Sun Nov 29
๐Ÿ“ Checked in at Double Wide Grill, Pittsburgh, PA.
Fri Nov 27
๐Ÿ“ Checked in at HackPittsburgh, Pittsburgh, PA.
Thu Nov 26
๐Ÿ“ Checked in at St. James Place Tavern, Pittsburgh, PA.
Wed Nov 25
๐Ÿ“ Checked in at Z Lounge, Pittsburgh, PA.
๐Ÿ“ Checked in at Walker's Pub, Pittsburgh, PA.
๐Ÿ“ Checked in at HackPittsburgh, Pittsburgh, PA.
Tue Nov 24
๐Ÿ“ Checked in at Cambod-Ican Kitchen, Pittsburgh, PA.
Mon Nov 23
๐Ÿ“ Checked in at HackPittsburgh, Pittsburgh, PA.
Sun Nov 22
๐Ÿ“ Checked in at OTB Bicycle Cafe, Pittsburgh, PA.
๐Ÿ“ Checked in at HackPittsburgh, Pittsburgh, PA.
Sat Nov 21
๐Ÿ“ Checked in at Don Allen Auto City, Pittsburgh, PA.
๐Ÿ“ Checked in at HackPittsburgh, Pittsburgh, PA.
๐Ÿ“ Checked in at The Library, Pittsburgh, PA.
Fri Nov 20
๐Ÿ“ Checked in at HackPittsburgh, Pittsburgh, PA.
Thu Nov 19
๐Ÿ“ Checked in at Kelly's Bar & Lounge, Pittsburgh, PA.
๐Ÿ“ Checked in at Bloomfield Bridge Tavern, Pittsburgh, PA.
Wed Nov 18
๐Ÿ“ Checked in at The Library, Pittsburgh, PA.
๐Ÿ“ Checked in at HackPittsburgh, Pittsburgh, PA.
Tue Nov 17
๐Ÿ“ Checked in at Hofbrรคuhaus Pittsburgh, Pittsburgh, PA.
Sun Nov 15
๐Ÿ“ Checked in at Double Wide Grill, Pittsburgh, PA.
Fri Nov 13
๐Ÿ“ Checked in at HackPittsburgh, Pittsburgh, PA.
๐Ÿ“ Checked in at Mad Mex, Pittsburgh, PA.
Wed Nov 11
๐Ÿ“ Checked in at HackPittsburgh, Pittsburgh, PA.
๐Ÿ›  Made a copy of Fridge Door Shelf Clips by schmarty.

Fridge Door Shelf Clips

Files

fridge_clip_r.stl
45413 bytes. Updated
fridge_clip_r.scad
1667 bytes. Updated
fridge_clip_l.stl
46268 bytes. Updated
fridge_clip_l.scad
1930 bytes. Updated
m5_hex_nut.scad
520 bytes. Updated

This work is licensed Creative Commons - Attribution.

Description

Clips for a refrigerator shelf restraint.

I recently moved into a new apartment with a missing bottom shelf restraint. Thanks to MakerBot and OpenSCAD, I can finally replace it!

The hole on the left side is a bit more damaged than the right, so I created 2 different clips.

One fun exercise when creating this thing was modeling an M5 nut in order to remove it from the model later. I recommend everyone try it. :)

Instructions

  • 1. [Optional] Adjust sizes, etc., in OpenSCAD, export to STL
  • 2. Skeinforge the STLs
  • 3. Print!
  • 4. Insert M5 nuts
  • 5. Insert clips into door
  • 6. Attach plexi/plywood/cardboard/what-have-you restraint with M5 bolts.
Tue Nov 10
๐Ÿ“ Checked in at Target, Homestead, PA.
๐Ÿ“ Checked in at Mad Mex, Pittsburgh, PA.
Sat Nov 7
๐Ÿ“ Checked in at HackPittsburgh, Pittsburgh, PA.
Fri Nov 6
๐Ÿ“ Checked in at HackPittsburgh, Pittsburgh, PA.
๐Ÿ“ Checked in at College of Fine Arts, Pittsburgh, PA.
Thu Nov 5
๐Ÿ“ Checked in at Silk Elephant, Pittsburgh, PA.
๐Ÿ“ Checked in at Arefa's Coffee, Pittsburgh, PA.
Wed Nov 4
๐Ÿ“ Checked in at HackPittsburgh, Pittsburgh, PA.
Tue Nov 3
๐Ÿ“ Checked in at HackPittsburgh, Pittsburgh, PA.
๐Ÿ“ Checked in at Beehive Coffeehouse, Pittsburgh, PA.
Mon Nov 2
๐Ÿ“ Checked in at HackPittsburgh, Pittsburgh, PA.
๐Ÿ“ Checked in at Piper's Pub, Pittsburgh, PA.
Sun Nov 1
๐Ÿ“ Checked in at Double Wide Grill, Pittsburgh, PA.